I have been looking for way to attach the teak hatch to the bow bulkhead that allows access to the new chain locker. Previously this area was just an empty storage area and the hatch was held in place poorly and frequently popped out. With the new chain locker and the interior panel of starboard securing the chain, the teak cover is less important to hold stuff in, but with only a 1/2” of bulkhead to which to fasten the hatch how to do was becoming a concern. I had thought about using a tee-nut, but that would require removing the chain to access the interior of the locker again. Not something I wanted to be doing any time soon.
Low and behold I happened on the threaded insert at my local hardware store. It is basically a sleeve with wood threads on the outside and 1/2-20 machine threads on the inside. With a 1/4-20 cap screw to be tightened by hand… PERFECT!
Here’s a pic of today’s miracle